STYLIDEAS  STYLPRO Mini LED Wand

To charge:

• The LEDs will all flash when the battery is low. Insert the USB-C cable (provided) into the port under the head of the device. Attach to a USB-C friendly power source. The red LED in the middle of the device will flash when charging. No LEDs will flash when the device is fully charged.

In use:

• Ensure your skin is cleansed and dry before use. Any skincare or makeup can block the light so the device may not work.
• Switch on. Do not look directly into the LEDs. Depending on the time of day, select Mode 1 , 2 or 3. Apply the device to the area you wish to treat, ensuring the light is directed into the skin. All three modes can be used within the same day. The device can be used around the eye, but do NOT apply directly over the eye or on the eyelids.
• Mode 1 for morning - the device will automatically be set to this mode when switched on. Use this mode in the morning. (Do not use this Mode more than once a day on the same area)
• Mode 2 for daytime - short press once on the on/off button to switch to daytime mode. Use this mode during the day. (Do not use this Mode more than 3x a day on the same area)
• Mode 3 for evening - short press twice on the on/off button to switch to evening mode. Use this mode before bed. (Do not use this Mode more than once a day on the same area)
• Hold the device against your skin until the light auto-switches off after 3 minutes.
• Repeat on all affected areas.
• Wipe the device clean after use (see cleaning instructions).

When cleaning:

• Ensure device is switched off.
• Wipe the surface of the LEDs with water wipes or damp cloth to remove any residue from skin oils.
• Clean the device body by using damp or microfibre cloth.
• Allow the device to dry completely prior to use.